Low-NOx condensing boiler manufacturer|About low NOx condensing boiler maintenance and maintenance steps
Low-nitrogen condensing boilers in the winter heating, hot water supply, production and other aspects of the use of more energy efficient and environmentally friendly, so low-nitrogen condensing boilers have gradually been recognized by the market, with the market low-nitrogen condensing boilers more and more use of the boiler maintenance is also particularly important, the following low-nitrogen condensing boiler manufacturers on the maintenance of low-nitrogen condensing boilers is briefly introduced. Huinuo Ke full premix condensing low nitrogen gas furnace LGQ700-AO.
Low nitrogen gas boiler in the maintenance and maintenance of precautions and content:
1, When the boiler in the maintenance work, one should first cut off the power supply, and then operate.
2, The boiler built-in burner needs to be regularly removed from the boiler body, and to do the work of removing carbon and dust foreign matter.
3, Photoelectric tube light surface should be wiped regularly, the filter should always keep clean and filtering function, and to carefully clean the filter, do not destroy the gasket.
4, In the burner, furnace, heat exchanger, condensate collector and siphon tube is not cleaned before the burner is not installed.
5, Check the sealing of air inlet pipe and exhaust pipe connection.
6, Thoroughly clean the condensate trap with water. Flush each side of the condensate trap for at least 5 minutes using the maximum water flow possible.
7, Use a special cleaning tool or cleaning cutter (accessory) to clean the area between the ribs of the main heat exchanger. Clean from the bottom up. Move the cleaning tool horizontally and diagonally between the heat exchanger ribs.
8, After the completion of the work, you need to check whether the tools, materials, accessories, etc., to prevent these parts left in the furnace and so on inside, in the acceptance before leaving the work site, but also to do a good job of overhaul records to facilitate future inquiries in the work.
For the maintenance of the boiler, our manufacturers recommend looking for qualified companies to do, do not recommend dismantling the machine to operate on their own.
Low-nitrogen condensing boiler product selection is the most critical, in the use of the time also need to operate in accordance with the code of practice to operate, so as not only to avoid personal harm, but also to extend the service life of the boiler. Boiler in the use of 1-2 years to carry out maintenance work on the boiler, which will help the normal operation of the future, but also regular maintenance, for the boiler is also to protect the boiler is the normal operation of the basic work.
